{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC 14 mm
Article no.: 205250 14
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Milling profile: WR
- Tolerance nominal ⌀: e8
- No. of teeth Z: 4
Product details
Technical Data
| Series | Master Alu | |
| Cutting edge ⌀ DC | 14 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Milling profile | WR | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 4 | |
| Helix angle | 35 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.4×D for side milling; Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 26 mm | |
| Overhang length L1 incl. recess | 36 mm | |
| Recess ⌀ D1 | 13 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 14 mm | |
| Corner rounding rv | 0.32 mm | |
| Feed fz for slot milling in short-chipping aluminium | 0.18 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.2 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205250 14 | |
| EAN / GTIN | 4062406122256 | |
| Manufacturer number | 205250 14 |
Application Table
N
450
N
400
N
380
N
120
N
100
N
160
N
200
Description
Version:
For roughing.
Special profile for machining non-ferrous metals.
Special profile for machining non-ferrous metals.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Ramping capability up to 45°.
Very high feed rates when plunging vertically, thanks to special plunging geometry.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Ramping capability up to 45°.
Very high feed rates when plunging vertically, thanks to special plunging geometry.
Note:
For HB shanks use order no. 205251.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC 14 mm
on request
In stock
24 pieces in stock
€170.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
6 pieces in stock
€105.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
12 pieces in stock
€127.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€156.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
10 pieces in stock
€187.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.4×D for side milling; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Standard | DIN 6527 | DIN 6527 | Manufacturer’s standard | DIN 6527 | Manufacturer’s standard |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Flute length Lc | 26 mm | 26 mm | 42 mm | 26 mm | 26 mm |
| Helix angle | 35 degrees | 45 degrees | 45 degrees | 42 degrees | 42 degrees |
| Feed fz for side milling in short-chipping aluminium | 0.2 mm | 0.2 mm | 0.2 mm | 0.17 mm | 0.12 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |