{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 12 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | Manufacturer’s standard | |
Type | W | |
Tolerance nominal ⌀ | h6 | |
No. of teeth Z | 5 | |
Helix angle | 38 degrees | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal | |
Cutting width ae for milling operation | 0.05×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 60 mm | |
Overhang length L1 incl. recess | 68 mm | |
Recess ⌀ D1 | 11.5 mm | |
Overall length L | 119 mm | |
Shank ⌀ Ds | 12 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for side milling in short-chipping aluminium | 0.05 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 203205 12 | |
EAN / GTIN | 4062406120009 | |
Manufacturer number | 203205 12 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
GARANT Master Alu solid carbide milling cutter HPC, DLC, ⌀ h6 DC: 12mm
on request
In stock
76 pieces in stock
€194.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
309 pieces in stock
€71.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
58 pieces in stock
€186.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
€186.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
€178.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Corner chamfer angle | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees |
Cutting width ae for milling operation | 0.05×D for side milling | 0.05×D for side milling | 0.05×D for side milling | 0.05×D for side milling | 0.05×D for side milling |
Through-coolant | no | no | no | no | no |
Standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard | Manufacturer’s standard |
Flute length Lc | 60 mm | 56 mm | 60 mm | 60 mm | 60 mm |
Type | W | N | N | N | W |
Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |