{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter with chip separators TPC 8 mm
Article no.: 203094 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 5 | |
| Helix angle | 40 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.03×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 40 mm | |
| Overall length L | 81 mm | |
| Shank ⌀ Ds | 8 mm | |
| Number of chip separators | 3 | |
| Corner chamfer width at 45° | 0.16 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in Toolox 44 HRC | 0.03 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203094 8 | |
| EAN / GTIN | 4045197954008 | |
| Manufacturer number | 203094 8 |
Application Table
P
350
P
310
P
270
P
200
P
120
H
50
H
30
H
20
M
190
M
120
Description
Version:
High-performance end mill for general-purpose applications, specially designed for TPC applications.
Strengthened core.
Optimised bending strength due to the use of ultra-fine grain substrates.
Offset chip breakers for controlled chip breaking.
Strengthened core.
Optimised bending strength due to the use of ultra-fine grain substrates.
Offset chip breakers for controlled chip breaking.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide milling cutter with chip separators TPC 8 mm
on request
In stock
40 pieces in stock
123,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
44 pieces in stock
86,60 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | 0.03×D | 0.05×D |
| Colour ring | green | green |
| Through-coolant | no | no |
| Standard | Manufacturer’s standard | Manufacturer’s standard |
| Type | N | N |
| Direction of infeed | horizontal and oblique | horizontal and oblique |
| Corner chamfer width at 45° | 0.16 mm | 0.12 mm |