{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel solid carbide roughing end mill HPC, TiAlN, ⌀ f8 DC: 5mm
Article no.: 203034 5
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Helix angle characteristic: unequal spacing
- Spacing of the cutters: unequal spacing
Product details
Technical Data
| Series | Master Steel | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203034 5 | |
| EAN / GTIN | 4045197718549 | |
| Manufacturer number | 203034 5 |
Application Table
P
260
P
240
P
190
P
180
P
150
M
80
M
70
K
250
Description
Version:
For roughing and finishing.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
At maximum machining depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ (nominal size)!
Up to 1×D into solid material at very high feed rates with smooth cutting action.
At maximum machining depths, ensure compliance with the ratio dimension LC (cutting length) / ⌀ (nominal size)!
Advantage:
Optimised flute form, eccentric relief ground, wide chip space.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
GARANT Master Steel solid carbide roughing end mill HPC, TiAlN, ⌀ f8 DC: 5mm
on request
In stock
116 pieces in stock
39,30 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
91 pieces in stock
45,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
125 pieces in stock
24,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
2,302 pieces in stock
21,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
61 pieces in stock
67,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
227 pieces in stock
36,20 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 degrees | 45 degrees | ||||
| Colour ring | green | green | green | green | green | green |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | ||||
| Helix angle | 42 degrees | 45 degrees | ||||
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | ||||
| Corner chamfer width at 45° | 0.25 mm | 0.25 mm | ||||
| Shank ⌀ Ds | 6 mm | 6 mm | ||||