{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide mini milling cutter 9,7 mm
Article no.: 202266 9,7
Article code:
- Tool material: Solid carbide
- Norm: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 9.7 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Norm | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Flute length Lc | 11 mm | |
| Overall length L | 55 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank form | HB | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.05 mm | |
| Feed fz for side milling in steel < 750 N/mm2 | 0.08 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202266 9,7 | |
| EAN / GTIN | 4045197864864 | |
| Manufacturer number | 202266 9,7 |
Application Table
N
170
N
140
N
100
P
70
P
60
P
45
M
40
K
55
Description
Version:
Shank similar to DIN 6535 HB.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Save on regrinding costs:
It is cheaper to use solid carbide mini milling cutters to the wear limit than to regrind them.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Solid carbide mini milling cutter 9,7 mm
on request
In stock
49 pieces in stock
€27.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
€31.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
65 pieces in stock
€41.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
€80.80
plus VAT at the current rate
Prices plus delivery costs
|
|
| Cutting width ae for milling operation | Full slot cutting depth 1×D ;Full slot cutting depth 1×D | Full slot cutting depth 1×D ;0.5×D for side milling | Full slot cutting depth 1×D ;0.3×D for side milling | Full slot cutting depth 1×D ;Full slot cutting depth 1×D |
| Overall length L | 55 | 48 | 72 | 72 |
| Norm | Manufacturer’s standard | Manufacturer’s standard | DIN 6527 | DIN 6527 |
| Cutting edge ⌀ DC | 9.7 | 9.7 | 9.7 | 9.7 |
| Flute length Lc | 11 | 11 | 22 | 22 |
| No. of teeth Z | 3 | 3 | 2 | 3 |
| Shank ⌀ Ds | 10 | 10 | 10 | 10 |