{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide milling cutter MTC, uncoated, ⌀ h6 DC: 16mm
Article no.: 202257 16
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: W
- Tolerance nominal ⌀: h6
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | W | |
| Tolerance nominal ⌀ | h6 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | MTC | |
| Flute length Lc | 36 mm | |
| Overhang length L1 incl. recess | 58 mm | |
| Recess ⌀ D1 | 15 mm | |
| Overall length L | 108 mm | |
| Shank ⌀ Ds | 16 mm | |
| Shank form | HB | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.065 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.09 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 202257 16 | |
| EAN / GTIN | 4045197860095 | |
| Manufacturer number | 202257 16 |
Application Table
N
190
N
150
N
120
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Without 45º corner chamfer.
Without 45º corner chamfer.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 202012.
Recommended successor product is No. 202012.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter MTC, uncoated, ⌀ h6 DC: 16mm
on request
In stock
27 pieces in stock
196,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
34 pieces in stock
262,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
181 pieces in stock
175,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
196 pieces in stock
175,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
199 pieces in stock
195,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
385 pieces in stock
195,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
52 pieces in stock
171,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
138 pieces in stock
107,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
35 pieces in stock
196,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
42 pieces in stock
233,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
76 pieces in stock
233,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
149 pieces in stock
129,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
30 pieces in stock
190,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
228,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
195,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0,25×D ved beskæring | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D |
| Overall length L | 108 mm | 92 mm | 92 mm | 92 mm | 92 mm | 92 mm | 92 mm | 92 mm | 108 mm | 108 mm | 108 mm | 110 mm | 92 mm | 108 mm | 92 mm |
| Cutting edge ⌀ DC | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Type | W | W | W | W | W | W | W | W | W | W | W | W | W | W | W |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |