{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 6 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | h6 | |
No. of teeth Z | 3 | |
Helix angle | 45 degrees | |
Helix angle characteristic | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | MTC | |
Flute length Lc | 13 mm | |
Overhang length L1 incl. recess | 19 mm | |
Recess ⌀ D1 | 5.7 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Shank form | HA | |
Corner chamfer width at 45° | 0.2 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.025 mm | |
Feed fz for side milling in short-chipping aluminium | 0.03 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202243 6 | |
EAN / GTIN | 4045197537478 | |
Manufacturer number | 202243 6 |
This article |
Recommendations |
|||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Solid carbide milling cutter MTC, uncoated, ⌀ DC: 6mm
on request
In stock
321 pieces in stock
36,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,201 pieces in stock
49,30 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
257 pieces in stock
21,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
160 pieces in stock
80,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
538 pieces in stock
36,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
271 pieces in stock
46,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
580 pieces in stock
46,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
354 pieces in stock
26,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
106 pieces in stock
50,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
219 pieces in stock
44,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
78 pieces in stock
53,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
58 pieces in stock
48,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | DLC | uncoated | DLC | uncoated | DLC | DLC | uncoated | DLC | uncoated | uncoated | DLC |
Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 45 degrees | 90 degrees | 90 degrees | 90 degrees |
Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0,25×D ved beskæring | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; 0.5×D for side milling | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling |
Through-coolant | no | no | no | no | no | no | no | no | no | no | no | no |
Flute length Lc | 13 mm | 13 mm | 13 mm | 16 mm | 13 mm | 13 mm | 13 mm | 12 mm | 13 mm | 13 mm | 13 mm | 13 mm |
Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |