{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 5 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 9 mm | |
Overall length L | 57 mm | |
Shank ⌀ Ds | 6 mm | |
Corner rounding rv | 0.2 mm | |
Feed fz for slot milling in short-chipping aluminium | 0.06 mm | |
Feed fz for side milling in short-chipping aluminium | 0.08 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202004 5 | |
EAN / GTIN | 4062406125905 | |
Manufacturer number | 202004 5 |
This article |
Recommendations |
||
---|---|---|---|
![]() ![]() GARANT Master Alu PickPocket solid carbide roughing end mill HPC 5 mm
on request
In stock
118 pieces in stock
€50.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
13 pieces in stock
€71.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
€33.20
plus VAT at the current rate
Prices plus delivery costs
|
|
Colour ring | yellow | yellow | yellow |
Cutting edge ⌀ DC | 5 mm | 5 mm | 5 mm |
Flute length Lc | 9 mm | 9 mm | 9 mm |
Tool material | Solid carbide | Solid carbide | Solid carbide |
Feed fz for side milling in short-chipping aluminium | 0.08 mm | 0.08 mm | 0.08 mm |
Feed fz for slot milling in short-chipping aluminium | 0.06 mm | 0.06 mm | 0.06 mm |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |