{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 10 mm | |
Coating | DLC | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 22 mm | |
Overhang length L1 incl. recess | 30 mm | |
Recess ⌀ D1 | 9.8 mm | |
Overall length L | 72 mm | |
Shank ⌀ Ds | 10 mm | |
Corner rounding rv | 0.32 mm | |
Feed fz for slot milling in short-chipping aluminium | 0.09 mm | |
Feed fz for side milling in short-chipping aluminium | 0.12 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202004 10 | |
EAN / GTIN | 4062406125981 | |
Manufacturer number | 202004 10 |
This article |
Recommendations |
||||
---|---|---|---|---|---|
![]() ![]() GARANT Master Alu PickPocket solid carbide roughing end mill HPC 10 mm
on request
In stock
246 pieces in stock
€92.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
112 pieces in stock
€121.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
81 pieces in stock
€98.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
210 pieces in stock
€112.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
143 pieces in stock
€66.20
plus VAT at the current rate
Prices plus delivery costs
|
|
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.3×D for side milling; 0,08×D | Full slot cutting depth 1×D; 0.3×D for side milling | 0.4×D for side milling; Full slot cutting depth 1×D | Full slot cutting depth 1×D; 0.5×D for side milling |
Recess ⌀ D1 | 9.8 mm | 9.7 mm | 9.7 mm | 9.5 mm | 9.5 mm |
Overall length L | 72 mm | 72 mm | 72 mm | 72 mm | 72 mm |
Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
Cutting edge ⌀ DC | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
Flute length Lc | 22 mm | 22 mm | 22 mm | 22 mm | 22 mm |
No. of teeth Z | 3 | 5 | 4 | 3 | 3 |