{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Series | Master Alu | |
Cutting edge ⌀ DC | 20 mm | |
Coating | uncoated | |
Tool material | Solid carbide | |
Standard | DIN 6527 | |
Type | W | |
Tolerance nominal ⌀ | e8 | |
No. of teeth Z | 3 | |
Helix angle | 42 degrees | |
Helix angle characteristic | unequal spacing | |
Spacing of the cutters | unequal spacing | |
Direction of infeed | horizontal, oblique and vertical | |
Cutting width ae for milling operation | Full slot cutting depth 1×D; Full slot cutting depth 1×D | |
Shank | DIN 6535 HA to h6 | |
Balance quality with shank | G 2.5 with HA | |
Through-coolant | no | |
Machining strategy | HPC | |
Flute length Lc | 41 mm | |
Overhang length L1 incl. recess | 52 mm | |
Recess ⌀ D1 | 19.8 mm | |
Overall length L | 104 mm | |
Shank ⌀ Ds | 20 mm | |
Corner chamfer angle | 90 degrees | |
Feed fz for slot milling in short-chipping aluminium | 0.18 mm | |
Feed fz for side milling in short-chipping aluminium | 0.22 mm | |
Colour ring | yellow | |
Type of product | End / face mill |
Article number | 202002 20 | |
EAN / GTIN | 4062406125868 | |
Manufacturer number | 202002 20 |
This article |
Recommendations |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
GARANT Master Alu PickPocket solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 20mm
on request
In stock
12 pieces in stock
€274.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
€425.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
66 pieces in stock
€273.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
82 pieces in stock
€273.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
104 pieces in stock
€304.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
139 pieces in stock
€304.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
€376.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
€376.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
103 pieces in stock
€175.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
46 pieces in stock
€350.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
€328.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Through-coolant | no | no | no | no | no | no | no | no | no | no | no |
Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
Flute length Lc | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 41 mm | 40 mm | 41 mm | 41 mm |
Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
Helix angle | 42 degrees | 20 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 20 degrees | 20 degrees | 45 degrees | 45 degrees | 42 degrees |
Type | W | W | W | W | W | W | W | W | W | W | W |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |