{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide mini slot drill, TiAlN, ⌀ e8 DC: 12mm
Article no.: 201920 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Flute length Lc | 16 mm | |
| Overall length L | 60 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank form | HB | |
| Corner chamfer width at 45° | 0.05 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.06 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.08 mm | |
| Correction factor for vc | 1.25 | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201920 12 | |
| EAN / GTIN | 4045197114976 | |
| Manufacturer number | 201920 12 |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
M
80
M
60
K
90
Description
Version:
Double relief ground side clearance angle. Centre cutting teeth for plunging.
Weldon shank similar to DIN 6535 HB.
Weldon shank similar to DIN 6535 HB.
Note:
Save on regrinding costs:
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.
It is cheaper to use solid carbide mini slot drills to the wear limit than to regrind them.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Solid carbide mini slot drill, TiAlN, ⌀ e8 DC: 12mm
on request
In stock
10 pieces in stock
57,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
124 pieces in stock
133,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
164 pieces in stock
116,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
58,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
122 pieces in stock
53,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
41 pieces in stock
99,20 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | AlCrN | TiAlN | TiSiN | TiAlN |
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Colour ring | without | red | green | green | green | without |
| Through-coolant | no | no | no | no | no | no |
| Flute length Lc | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Tolerance nominal ⌀ | e8 | f8 | e8 | e8 | e8 | e8 |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm | 12 mm |