{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill HPC, TiAlN, ⌀ DC: 2,5mm
Article no.: 201648 2,5
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerance nominal ⌀: 0 / -0.02
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 2.5 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerance nominal ⌀ | 0 / -0.02 | |
| No. of teeth Z | 2 | |
| Helix angle | 35 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 6.3 mm | |
| Overall length L | 40 mm | |
| Shank ⌀ Ds | 4 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 70 HRC | 0.005 mm | |
| Feed fz for side milling in steel < 70 HRC | 0.007 mm | |
| Colour ring | red | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201648 2,5 | |
| EAN / GTIN | 4045197641458 | |
| Manufacturer number | 201648 2,5 |
Application Table
H
60
H
50
H
40
H
35
Description
Version:
GARANT Diabolo 70:
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 0.5 − 5: Recess angle α = 15°.
Special solid carbide substrate with extremely high tensile strength combined with outstanding wear resistance for optimum process reliability. Newly developed nano-crystalline high-tech coating for hard milling up to 70 HRC. Very suitable for continuous use in tool and mould making.
Sizes 0.5 − 5: Recess angle α = 15°.
Application:
Due to the special hard geometry ideal for use on hardened materials from 60 HRC to 70 HRC.
Note:
fz for ap = 0.05×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Solid carbide slot drill HPC, TiAlN, ⌀ DC: 2,5mm
on request
In stock
100 pieces in stock
€68.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
94 pieces in stock
€49.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
72 pieces in stock
€40.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
232 pieces in stock
€50.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
608 pieces in stock
€18.05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
339 pieces in stock
€14.05
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
73 pieces in stock
€15.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
229 pieces in stock
€27.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
198 pieces in stock
€19.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
286 pieces in stock
€45.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
285 pieces in stock
€21.50
plus VAT at the current rate
Prices plus delivery costs
|
|
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 | HB with h6 | HB with h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HB to h6 | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Cutting edge ⌀ DC | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide | Solid carbide |
| Type | H | H | W | W | N | N | N | N | N | N | N |
| No. of teeth Z | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 4 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |