{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide slot drill 1,2 mm
Article no.: 201630 1,2
Article code:
- Tool material: Solid carbide
- Standard: DIN 6527
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 1.2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.5×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 4 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 3 mm | |
| Shank form | HA | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.005 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.006 mm | |
| Correction factor for vc | 1.25 | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 201630 1,2 | |
| EAN / GTIN | 4045197264114 | |
| Manufacturer number | 201630 1,2 |
Application Table
N
280
N
200
P
120
P
105
P
100
P
70
P
60
M
80
M
60
K
90
Description
Version:
Eccentric relief ground for stronger cutting edges.
Size 0.25 to 2.5 - with double relief ground side clearance angle.
Tolerance: Size nominal ⌀ Dc = e8.
Size 0.25 to 2.5 - with double relief ground side clearance angle.
Tolerance: Size nominal ⌀ Dc = e8.
Application:
The intermediate sizes are especially for milling keyway slots.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Solid carbide slot drill 1,2 mm
on request
In stock
55 pieces in stock
€25.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
259 pieces in stock
€15.65
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 90 | 90 |
| Standard | DIN 6527 | DIN 6527 |
| Shank | DIN 6535 HA to h6 | DIN 6535 HA to h6 |
| Shank form | HA | HA |
| Cutting edge ⌀ DC | 1.2 | 1.2 |
| Tool material | Solid carbide | Solid carbide |
| Type of product | End / face mill | End / face mill |