{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM, TiAlN, ⌀ DC: 25mm
Article no.: 192890 25
Article code:
- Tool material: HSS PM
- Standard: DIN 844
- Milling profile: HR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 | |
| Milling profile | HR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 45 mm | |
| Overall length L | 121 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.052 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192890 25 | |
| EAN / GTIN | 4045197108739 | |
| Manufacturer number | 192890 25 |
Application Table
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
N
110
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Economy version.
Centre cutting teeth for plunging.
Economy version.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Roughing end mill HSS-PM, TiAlN, ⌀ DC: 25mm
on request
In stock
39 pieces in stock
169,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
172,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
9 pieces in stock
261,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
67 pieces in stock
215,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | uncoated | TiAlN | TiAlN |
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Colour ring | without | yellow | yellow | green |
| Standard | DIN 844 | DIN 844 B | DIN 844 B | DIN 844 |
| Tool material | HSS PM | HSS Co 8 | HSS PM | HSS PM |
| Shank ⌀ Ds | 25 mm | 25 mm | 25 mm | 25 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |