{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-Co8, TiAlN, ⌀ k12 DC: 10mm
Article no.: 192605 10
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer width at 45° | 0.5 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.014 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192605 10 | |
| EAN / GTIN | 4067263290841 | |
| Manufacturer number | 192605 10 |
Application Table
N
120
P
781
P
55
P
55
P
29
P
25
M
17
M
14
K
46
N
90
Description
Version:
Sizes 6M to 25M – MID mills. Dimensions to factory standard, between DIN 844 shortand DIN 844 long.
With relief ground knuckle profile. The wide teeth lands permit multiple re-grinding without losing the profile.
End face geometry for plunging and unequal spacing of the teeth.
With relief ground knuckle profile. The wide teeth lands permit multiple re-grinding without losing the profile.
End face geometry for plunging and unequal spacing of the teeth.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Roughing end mill HSS-Co8, TiAlN, ⌀ k12 DC: 10mm
on request
In stock
1,193 pieces in stock
36,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
120 pieces in stock
39,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
37,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
79 pieces in stock
33,90 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
65 pieces in stock
47,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
204 pieces in stock
42,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
83 pieces in stock
39,70 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
25 pieces in stock
33,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
138 pieces in stock
23,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
121 pieces in stock
20,50 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Colour ring | without | without | without | without | without | without | without | without | without | without |
| Milling profile | NR | NF | NR | NR | NR | NR | NR | NR | NR | NR |
| Helix angle | 30 degrees | 25 degrees | 25 degrees | 25 degrees | 25 degrees | 25 degrees | 25 degrees | 25 degrees | 30 degrees | 30 degrees |
| No. of teeth Z | 4 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 6 mm | 10 mm | 6 mm | 10 mm | 6 mm | 10 mm | 6 mm |