{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill HSS-PM 14 mm
Article no.: 192445 14
Article code:
- Tool material: HSS PM
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: js12
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 14 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 26 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.6 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.03 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192445 14 | |
| EAN / GTIN | 4045197106124 | |
| Manufacturer number | 192445 14 |
Application Table
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
For the most demanding metal removal rates.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
For the most demanding metal removal rates.
Advantage:
Compared to multi−flute cutters, better chip evacuation due to larger flutes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Roughing end mill HSS-PM 14 mm
on request
In stock
20 pieces in stock
70,60 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
64 pieces in stock
90,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
38 pieces in stock
72,80 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
31 pieces in stock
89,40 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees | 45 degrees |
| Colour ring | without | green | without | without |
| Through-coolant | no | no | no | no |
| Standard | DIN 844 B | DIN 844 | DIN 844 | DIN 844 B |
| Helix angle | 25 degrees | 30 degrees | 30 degrees | 50 degrees |
| Tolerance nominal ⌀ | js12 | ±0.12 | k12 | k10 |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm | 12 mm |