{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cutting edge ⌀ DC | 20 mm | |
Coating | uncoated | |
Tool material | HSS Co 8 | |
Standard | DIN 844 B | |
Milling profile | NF | |
Tolerance nominal ⌀ | k10 | |
No. of teeth Z | 3 | |
Helix angle | 25 degrees | |
Direction of infeed | horizontal, oblique and vertical | |
Shank | DIN 1835 B to h6 | |
Through-coolant | no | |
Flute length Lc | 38 mm | |
Overall length L | 104 mm | |
Shank ⌀ Ds | 20 mm | |
Corner chamfer width at 45° | 0.5 mm | |
Corner chamfer angle | 45 degrees | |
Feed fz for slot milling in steel < 750 N/mm2 | 0.07 mm | |
Colour ring | without | |
Type of product | End / face mill |
Article number | 191640 20 | |
EAN / GTIN | 4045197104397 | |
Manufacturer number | 191640 20 |
This article |
Recommendations |
|||||
---|---|---|---|---|---|---|
Semi-roughing end mill, uncoated, ⌀ k10 DC: 20mm
on request
In stock
13 pieces in stock
€89.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
€78.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
61 pieces in stock
€110.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
97 pieces in stock
€90.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
61 pieces in stock
€53.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
964 pieces in stock
€76.80
plus VAT at the current rate
Prices plus delivery costs
|
|
Coating | uncoated | uncoated | TiAlN | TiAlN | uncoated | TiAlN |
Cutting edge ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |
Flute length Lc | 38 mm | 38 mm | 38 mm | 38 mm | 38 mm | 38 mm |
Feed fz for slot milling in steel < 750 N/mm2 | 0.07 mm | 0.05 mm | 0.05 mm | 0.05 mm | 0.031 mm | 0.031 mm |
No. of teeth Z | 3 | 3 | 3 | 3 | 4 | 4 |
Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
Shank ⌀ Ds | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm | 20 mm |