{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
End mill HSS-E-SPM HPC 25 mm
Article no.: 191635 25
Article code:
- Tool material: HSS E SPM
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: k12
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 25 mm | |
| Coating | TiAlN | |
| Tool material | HSS E SPM | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 4 | |
| Helix angle | 30 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 45 mm | |
| Overall length L | 121 mm | |
| Shank ⌀ Ds | 25 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for side milling in steel < 1100 N/mm2 | 0.08 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191635 25 | |
| EAN / GTIN | 4045197547231 | |
| Manufacturer number | 191635 25 |
Application Table
N
159
N
125
P
95
P
74
P
74
P
42
P
32
M
26
M
21
K
63
N
125
Description
Version:
Special SPM substrate with very high cobalt content.
Combines the hardness of solid carbide and the toughness of PM steel.
Multi-flute end mill with universal geometry.
Can be used as a finishing end mill, semi-roughing or roughing end mill.
Combines the hardness of solid carbide and the toughness of PM steel.
Multi-flute end mill with universal geometry.
Can be used as a finishing end mill, semi-roughing or roughing end mill.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
End mill HSS-E-SPM HPC 25 mm
on request
In stock
1 pieces in stock
€204.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
18 pieces in stock
€192.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€224.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
77 pieces in stock
€235.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
€151.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
| Through-coolant | no | no | no | no | no |
| Cutting edge ⌀ DC | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
| Tool material | HSS E SPM | HSS E SPM | HSS E SPM | HSS E SPM | HSS E SPM |
| Machining strategy | HPC | HPC | HPC | HPC | HPC |
| Shank ⌀ Ds | 25 mm | 25 mm | 25 mm | 25 mm | 25 mm |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |