{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Mini milling cutter HSS-PM, TiAlN, ⌀ e8 DC: 4,5mm
Article no.: 191420 4,5
Article code:
- Tool material: HSS PM
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 4.5 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | HB with h6 | |
| Through-coolant | no | |
| Flute length Lc | 11 mm | |
| Overall length L | 42 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.005 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191420 4,5 | |
| EAN / GTIN | 4045197102638 | |
| Manufacturer number | 191420 4,5 |
Application Table
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
23
M
18
N
110
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground. General-purpose cutting edge geometry. Shank similar to DIN 1835 B with shank tolerance h6. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
For the most demanding metal removal rates.
Eccentric relief ground. General-purpose cutting edge geometry. Shank similar to DIN 1835 B with shank tolerance h6. For use as slot drill or end mill in side lock arbors and collet chucks. High cutting performance, very competitive price. For milling keyways.
For the most demanding metal removal rates.
Note:
Save the regrinding costs: it is cheaper to use a mini slot drill to the limit of wear and throw it away, than to regrind it.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||||||
|---|---|---|---|---|---|---|---|---|---|
Mini milling cutter HSS-PM, TiAlN, ⌀ e8 DC: 4,5mm
on request
In stock
77 pieces in stock
21,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
125 pieces in stock
14,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
91 pieces in stock
28,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
111 pieces in stock
17,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
99 pieces in stock
22,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Subsequent delivery
0 pieces in stock
8,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
206 pieces in stock
18,65 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
55 pieces in stock
9,25 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
100 pieces in stock
12,45 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Through-coolant | no | no | no | no | no | no | no | no | no |
| Flute length Lc | 11 mm | 11 mm | 11 mm | 11 mm | 19 mm | 7 mm | 7 mm | 11 mm | 11 mm |
| Helix angle | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30 degrees | 30-40 degrees |
| Type | N | N | N | N | N | N | N | N | N |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.005 mm | 0.007 mm | 0.007 mm | 0.007 mm | 0.005 mm | 0.005 mm | 0.005 mm | 0.005 mm | 0.008 mm |
| No. of teeth Z | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |