{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drills 3 mm
Article no.: 191320 3
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: W
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 3 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | W | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 42 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 8 mm | |
| Overall length L | 52 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.008 mm | |
| Colour ring | yellow | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191320 3 | |
| EAN / GTIN | 4045197101655 | |
| Manufacturer number | 191320 3 |
Application Table
N
150
N
37
P
28
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
Eccentric relief ground.
- Wide, precision ground chip flutes.
- Extremely fine workpiece surfaces due to precisely ground cutting edges.
- Special rake angle for aluminium.
Note:
For milling keyways.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Slot drills 3 mm
on request
In stock
362 pieces in stock
24,20 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
302 pieces in stock
14,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
529 pieces in stock
17,40 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
44 pieces in stock
20,10 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
543 pieces in stock
12,45 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
557 pieces in stock
15,00 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | TiAlN | uncoated | uncoated | TiAlN |
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees | 90 degrees |
| Cutting edge ⌀ DC | 3 mm | 3 mm | 3 mm | 3 mm | 3 mm | 3 mm |
| Helix angle | 42 degrees | 30 degrees | 30 degrees | 30 degrees | 30-40 degrees | 30-40 degrees |
| Tolerance nominal ⌀ | e8 | e8 | e8 | e8 | k10 | k10 |
| No. of teeth Z | 3 | 3 | 3 | 3 | 4 | 4 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |