{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drills HSS-Co8 6 mm
Article no.: 191280 6
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 24 mm | |
| Overall length L | 68 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.011 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191280 6 | |
| EAN / GTIN | 4045197101549 | |
| Manufacturer number | 191280 6 |
Application Table
N
83
P
28
P
25
P
23
K
23
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
Eccentric relief ground.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Slot drills HSS-Co8 6 mm
on request
In stock
302 pieces in stock
€18.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
603 pieces in stock
€14.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
821 pieces in stock
€17.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
547 pieces in stock
€12.45
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
620 pieces in stock
€15.00
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without | without | without |
| Through-coolant | no | no | no | no | no |
| Cutting edge ⌀ DC | 6 | 6 | 6 | 6 | 6 |
| Flute length Lc | 24 | 13 | 13 | 13 | 13 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 6 | 6 | 6 | 6 | 6 |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill | End / face mill |