{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drills HSS-PM, TiAlN, ⌀ e8 DC: 10mm
Article no.: 191250 10
Article code:
- Tool material: HSS PM
- Standard: DIN 844 B
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 10 mm | |
| Coating | TiAlN | |
| Tool material | HSS PM | |
| Standard | DIN 844 B | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 22 mm | |
| Overall length L | 72 mm | |
| Shank ⌀ Ds | 10 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.02 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 191250 10 | |
| EAN / GTIN | 4045197101112 | |
| Manufacturer number | 191250 10 |
Application Table
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
25
M
18
K
55
N
110
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
For very high demands on the metal removal rate.
Eccentric relief ground.
For very high demands on the metal removal rate.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Slot drills HSS-PM, TiAlN, ⌀ e8 DC: 10mm
on request
In stock
276 pieces in stock
€43.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
480 pieces in stock
€17.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
377 pieces in stock
€22.70
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
254 pieces in stock
€26.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
95 pieces in stock
€51.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
312 pieces in stock
€30.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
893 pieces in stock
€15.95
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
257 pieces in stock
€33.40
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
201 pieces in stock
€28.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
992 pieces in stock
€19.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
43 pieces in stock
€36.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
154 pieces in stock
€56.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
22 pieces in stock
€39.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
71 pieces in stock
€58.20
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | TiAlN | uncoated | TiAlN | uncoated | TiAlN | uncoated | uncoated | TiAlN | uncoated | TiAlN | uncoated | TiAlN | uncoated | TiAlN |
| Overall length L | 72 mm | 72 mm | 72 mm | 95 mm | 95 mm | 72 mm | 72 mm | 72 mm | 95 mm | 72 mm | 72 mm | 72 mm | 75 mm | 72 mm |
| Standard | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | DIN 844 B | Manufacturer’s standard | DIN 844 B |
| Shank | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 | DIN 1835 B to h6 |
| Cutting edge ⌀ DC | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
| Tool material | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS PM | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS Co 8 | HSS PM |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm | 12 mm | 10 mm |