{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Slot drill HSS-Co8 2 mm
Article no.: 191070 2
Article code:
- Tool material: HSS Co 8
- Standard: DIN 327 D
- Type: N
- Tolerance nominal ⌀: e8
- Number of effective teeth Z (peripheral side): 2
Product details
Technical Data
| Cutting edge ⌀ DC | 2 mm | |
| Coating | TiAlN | |
| Tool material | HSS Co 8 | |
| Standard | DIN 327 D | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| Number of effective teeth Z (peripheral side) | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 4 mm | |
| Overall length L | 48 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.006 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | without | |
| Type of product | Milling cutter |
Identification numbers & Classifications
| Article number | 191070 2 | |
| EAN / GTIN | 4045197099679 | |
| Manufacturer number | 191070 2 |
Application Table
P
78
P
55
P
55
M
17
M
14
K
46
N
92
Description
Version:
Centre cutting edge geometry for plunging.
Economy version.
Economy version.
Application:
For milling keyways (slots) or pockets from the centre of the component.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Slot drill HSS-Co8 2 mm
on request
In stock
287 pieces in stock
€15.90
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
892 pieces in stock
€11.85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
227 pieces in stock
€18.35
plus VAT at the current rate
Prices plus delivery costs
|
|
| Colour ring | without | without | without |
| Helix angle | 30 | 30 | 30 |
| Type | N | N | N |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.006 | 0.006 | 0.006 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Shank ⌀ Ds | 6 | 6 | 6 |
| Type of product | Milling cutter | Milling cutter | Milling cutter |