{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine reamer configurable, uncoated, Nominal ⌀ DC: 16mm
Article no.: 164180 16
Article code:
- Tool material: HSS E
- Standard: DIN 208 B
- Helix angle: 7-8
- Through-coolant: no
- Shank: Morse taper
Product details
Technical Data
| Nominal ⌀ DC | 16 mm | |
| Coating | uncoated | |
| Tool material | HSS E | |
| Standard | DIN 208 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Shank | Morse taper | |
| Application for type of drilling | for through hole | |
| ⌀ range | 15.510 mm - 16.000 mm | |
| Flute length Lc | 52 mm | |
| Overhang L1 | 127 mm | |
| Overall length L | 210 mm | |
| Number of cutting edges Z | 8 | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | |
| Reaming oversize in diameter | 0.2 mm - 0.3 mm | |
| Colour ring | without | |
| Configurable tolerances | C; CD; D; E; EF; F; FG; G; H; I; J; JS; O; L; M; N; O; P; Q; R; S; T; U; V; W; X | |
| Configurable qualities | 5; 6; 7; 8; 9; 10; 11; 12; 13 | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 164180 16 | |
| EAN / GTIN | 4045197092397 | |
| Manufacturer number | 164180 16 |
Application Table
N
20
N
20
P
15
P
10
P
7
P
5
P
4
M
5
M
5
S
5
K
5
N
13
Description
Version:
Reamers finish ground to match your specification.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Even number of teeth with irregular spacing. The hole is accurately round and free of chatter marks. The cylindrical ground land on the plain cutting section smooths the hole and guides the reamer. With Morse taper shank.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Also suitable for blind holes due to the short chamfer lead.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||||
|---|---|---|---|---|---|---|
Machine reamer configurable, uncoated, Nominal ⌀ DC: 16mm
on request
Unknown
0 pieces in stock
117,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
580 pieces in stock
47,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
Unknown
0 pieces in stock
106,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
53 pieces in stock
103,50 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
165,00 €
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
166 pieces in stock
69,60 €
plus VAT at the current rate
Prices plus delivery costs
|
|
| Overhang L1 | 127 mm | 123 mm | 123 mm | 124 mm | 120 mm | 127 mm |
| Nominal ⌀ DC | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm | 16 mm |
| Flute length Lc | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm |
| Tool material | HSS E | HSS E | HSS E | HSS E | HSS E | HSS E |
| Application for type of drilling | for through hole | for through holes | for through holes | for through holes | for through holes | for through hole |
| Feed f in steel < 750 N/mm2 | 0.2 mm/rev. | 0.3 mm/rev. | 0.3 mm/rev. | 0.3 mm/rev. | 0.3 mm/rev. | 0.2 mm/rev. |
| Reaming oversize in diameter | 0.2 mm - 0.3 mm | 0.1 mm - 0.3 mm | 0.2 mm - 0.3 mm | 0.2 mm - 0.3 mm | 0.2 mm - 0.3 mm | 0.2 mm - 0.3 mm |