{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Countersink Form C 60° 10 mm
Article no.: 150845 10
Article code:
- Countersink tip angle: 60
- Tool material: HSS
- Number of cutting edges Z: 3
- Standard: DIN 334
- Shank: Plain shank with h9
Product details
Technical Data
| External ⌀ | 10 mm | |
| Coating | TiAlN | |
| Countersink tip angle | 60 degrees | |
| Tool material | HSS | |
| Number of cutting edges Z | 3 | |
| Standard | DIN 334 | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| smallest countersink ⌀ for holes from | 2.5 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed f in steel < 500 N/mm2 | 0.12 mm/rev. | |
| Colour ring | green | |
| Type of product | Stepped drill and countersink |
Identification numbers & Classifications
| Article number | 150845 10 | |
| EAN / GTIN | 4045197364753 | |
| Manufacturer number | 150845 10 |
Application Table
N
90
N
43
N
25
P
38
P
35
P
35
M
9
Description
Version:
The chip flutes are ground from solid. Countersink point and circumference are relief ground and cut easily. This results in easy and chatter-free cutting for deep countersinking, as well as for deburring or countersinking.
Application:
For chatter-free countersinking and deburring.
Especially suitable for chamfering tapped holes and for countersinking in jig and tool making.
Especially suitable for chamfering tapped holes and for countersinking in jig and tool making.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
Countersink Form C 60° 10 mm
on request
In stock
134 pieces in stock
€31.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
276 pieces in stock
€32.30
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
410 pieces in stock
€33.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
93 pieces in stock
€33.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
268 pieces in stock
€17.35
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 3 | 3 | 3 | 3 | 3 |
| Countersink tip angle | 60 degrees | 90 degrees | 90 degrees | 60 degrees | 90 degrees |
| Standard | DIN 334 | DIN 335 C | DIN 335 C | DIN 334 | DIN 335 C |
| Tool material | HSS | HSS | HSS | HSS | HSS |
| Shank ⌀ Ds | 6 mm | 6 mm | 6 mm | 6 mm | 6 mm |
| smallest countersink ⌀ for holes from | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm | 2.5 mm |
| Type of product | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink | Stepped drill and countersink |