{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
External ⌀ | 25 mm | |
Coating | TiN | |
Countersink tip angle | 90 degrees | |
Tool material | HSS | |
Number of cutting edges Z | 3 | |
Standard | DIN 335 D | |
Shank | Morse taper | |
Through-coolant | no | |
smallest countersink ⌀ for holes from | 3.8 mm | |
Overall length L | 106 mm | |
Morse taper MT | 2 | |
for countersunk screws DIN 7991 | M12 | |
Feed f in steel < 500 N/mm2 | 0.2 mm/rev. | |
Colour ring | without | |
Pre-drill ⌀ | 3.8 mm | |
Type of product | Stepped drill and countersink |
Article number | 150396 25 | |
EAN / GTIN | 4045197087010 | |
Manufacturer number | 150396 25 |
This article |
Recommendations |
|||
---|---|---|---|---|
![]() ![]() High-precision countersink 90° 25 mm
on request
In stock
82 pieces in stock
€88.20
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
€61.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
50 pieces in stock
€42.60
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
23 pieces in stock
€47.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 3 | 3 | 3 | 3 |
Colour ring | without | without | without | without |
Through-coolant | no | no | no | no |
Countersink tip angle | 90 degrees | 90 degrees | 90 degrees | 60 degrees |
Morse taper MT | 2 | 2 | 2 | 2 |
smallest countersink ⌀ for holes from | 3.8 mm | 3.8 mm | 3.8 mm | 6.3 mm |
Feed f in steel < 500 N/mm2 | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. |