{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap for synchronised spindles HSS-E-PM M4
Article no.: 132065 M4
Article code:
Click to enlarge image
Click to enlarge image
The spiral point evacuates the swarf in the cutting direction.
Click to enlarge image
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M4 | |
| Coating | TiAlN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | B | |
| Shank | DIN 1835 B with h6 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2.5×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 0.7 mm | |
| Overall length L | 70 mm | |
| Shank ⌀ Ds | 6 mm | |
| Shank square □ | 4.9 mm | |
| Tapping hole ⌀ | 3.3 mm | |
| Thread ⌀ | 4 mm | |
| Shank tolerance | h6 | |
| Type of threading tool | Machine tap for synchronous machining | |
| Number of clamping slots | 3 | |
| Colour ring | red | |
| Number of cutting edges Z | 3 | |
| Thread depth | 10 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132065 M4 | |
| EAN / GTIN | 4045197445957 | |
| Manufacturer number | 132065 M4 |
Application Table
P
37
P
35
P
22
P
12
P
7
H
7
H
6
Description
Version:
Sturdy design with spiral point and shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine.
Special TiAlN coating for optimum tool life. For use with emulsion (fat content minimum 8%).
Special TiAlN coating for optimum tool life. For use with emulsion (fat content minimum 8%).
Recommendation:
For TOOLOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05 to 0.3 mm larger.