{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel SPEED solid carbide drill, Weldon shank DIN 6535 HB, TiAlN, ⌀ DC h7: 9,7mm
Article no.: 123026 9,7
Article code:
Click to enlarge image
Weldon shank DIN 6535 HB
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 8×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Series | Master Steel | |
| Nominal ⌀ DC | 9.7 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 8×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 135 degrees | |
| recommended maximum drilling depth L2 | 80.5 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, to 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 95 mm | |
| Overall length L | 142 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed f in steel < 1100 N/mm2 | 0.18 mm/rev. | |
| Colour ring | green | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 123026 9,7 | |
| EAN / GTIN | 4045197846686 | |
| Manufacturer number | 123026 9,7 |
Application Table
P
195
P
150
P
135
P
125
P
80
M
65
K
120
K
115
Description
Version:
Developed for use with very high cutting speeds. Outstandingly suitable for machines with low installed power and high speeds.
A slim chisel point and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy. Optimised micro-geometry for increased working life and performance capability.
- Clear reduction in cutting forces due to special cutter geometry.
- Coating for best wear resistance even at high process temperatures.
- Polished flutes for good chip clearance.
A slim chisel point and the special arrangement of the 4 guide chamfers ensure high positioning and alignment accuracy. Optimised micro-geometry for increased working life and performance capability.
Note:
Flute length LC = L2 + 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
|
GARANT Master Steel SPEED solid carbide drill, Weldon shank DIN 6535 HB, TiAlN, ⌀ DC h7: 9,7mm
on request
In stock
15 pieces in stock
€ 280,00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
5 pieces in stock
€ 339,00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€ 336,00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
4 pieces in stock
€ 237,00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
€ 162,50
plus VAT at the current rate
Prices plus delivery costs
|
|
| Number of cutting edges Z | 2 | 2 | 2 | 2 | 2 |
| Version | 8×D | 8×D | 8×D | 8×D | 8×D |
| Overall length L | 142 mm | 142 mm | 142 mm | 142 mm | 142 mm |
| Nominal ⌀ DC | 9.7 mm | 9.7 mm | 9.7 mm | 9.7 mm | 9.7 mm |
| Flute length Lc | 95 mm | 95 mm | 95 mm | 95 mm | 95 mm |
| Shank ⌀ Ds | 10 mm | 10 mm | 10 mm | 10 mm | 10 mm |
| Type of product | Jobber drill | Jobber drill | Jobber drill | Jobber drill | Jobber drill |