{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Alu FEED solid carbide drill, Weldon shank DIN 6535 HB 4,3 mm
Article no.: 122596 4,3
Article code:
- Tool material: solid carbide
- Standard: DIN 6537
- Version: 6×D
- Type: W
- Tolerance nominal ⌀: h7
Product details
Technical Data
| Series | Master Alu | |
| Nominal ⌀ DC | 4.3 mm | |
| Coating | DLC | |
| Tool material | solid carbide | |
| Standard | DIN 6537 | |
| Version | 6×D | |
| Type | W | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 3 | |
| Point angle | 130 degrees | |
| recommended maximum drilling depth L2 | 29.6 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | yes, with 25 bar | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 36 mm | |
| Overall length L | 74 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed f in aluminium short-chipping | 0.56 mm/rev. | |
| Colour ring | yellow | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122596 4,3 | |
| EAN / GTIN | 4062406724863 | |
| Manufacturer number | 122596 4,3 |
Application Table
N
300
N
250
N
200
N
200
Description
Version:
With DLC coating – for longer tool lives, especially with aluminium with a higher Si content. Coating on order – no return. Delivery time approx. 3 weeks if the basic item is available ex stock. Please note the minimum order quantity.
3-cutter tool, specially developed for use at very high feed rates in aluminium. Outstandingly suitable for machines with high power consumption and stable machining conditions.
3-cutter tool, specially developed for use at very high feed rates in aluminium. Outstandingly suitable for machines with high power consumption and stable machining conditions.
- Specially developed cutter geometry, designed for very high feed rates, reduced cutting pressure and controlled chip breaking.
- Precision flute profile for reliable evacuation of chips.
- Achieve outstanding feed rates and tool life thanks to the third cutting edge.
Note:
Flute length LC = L2 + 1.5 × DC.