{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
HSS core drill N, uncoated, ⌀ DC h8: 20,5mm
Article no.: 116620 20,5
Article code:
- Tool material: HSS
- Standard: DIN 343
- Type: N
- Tolerance nominal ⌀: h8
- Point angle: 120
Product details
Technical Data
| Nominal ⌀ DC | 20.5 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 343 | |
| Type | N | |
| Tolerance nominal ⌀ | h8 | |
| Point angle | 120 degrees | |
| Shank | Morse taper | |
| Number of cutting edges Z | 3 | |
| Through-coolant | no | |
| recommended maximum drilling depth L2 | 114.3 mm | |
| Flute length Lc | 145 mm | |
| Overall length L | 243 mm | |
| Min. pre-drilling -⌀ Dmin | 14.6 mm | |
| Morse taper MT size | 2 | |
| Feed f in steel < 750 N/mm2 | 0.21 mm/rev. | |
| Colour ring | without | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 116620 20,5 | |
| EAN / GTIN | 4062406097165 | |
| Manufacturer number | 116620 20,5 |
Application Table
N
45
P
40
P
30
P
25
P
10
P
8
M
12
K
25
Description
Version:
Strong core. Sturdy jobber drill for better guidance in the hole
Advantage:
Particularly suitable for drilling out holes that are out of round. Misaligned holes can be aligned.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
||||
|---|---|---|---|---|---|
HSS core drill N, uncoated, ⌀ DC h8: 20,5mm
on request
Unknown
0 pieces in stock
€125.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
154 pieces in stock
€37.10
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
82 pieces in stock
€56.80
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
39 pieces in stock
€107.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
€101.50
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated | uncoated | uncoated |
| Overall length L | 243 mm | 243 mm | 243 mm | 243 mm | 282 mm |
| Through-coolant | no | no | no | no | no |
| Shank | Morse taper | Morse taper | Morse taper | Morse taper | Morse taper |
| Flute length Lc | 145 mm | 145 mm | 145 mm | 145 mm | 184 mm |
| Feed f in steel < 750 N/mm2 | 0.21 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. | 0.2 mm/rev. |
| recommended maximum drilling depth L2 | 114.3 mm | 114.3 mm | 114.3 mm | 114.3 mm | 153.3 mm |