{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Nominal ⌀ DC | 20 mm | |
Coating | uncoated | |
Tool material | HSS Co 8 | |
Standard | Manufacturer’s standard | |
Type | H | |
Tolerance nominal ⌀ | h8 | |
Point angle | 130 degrees | |
Helix angle | 8-15 degrees | |
Shank | Morse taper | |
Number of cutting edges Z | 2 | |
Through-coolant | no | |
recommended maximum drilling depth L2 | 53 mm | |
Flute length Lc | 83 mm | |
Overall length L | 204 mm | |
Morse taper MT size | 3 | |
Feed f in steel < 1400 N/mm2 | 0.14 mm/rev. | |
Colour ring | without | |
Type of product | Jobber drill |
Article number | 116380 20 | |
EAN / GTIN | 4045197032638 | |
Manufacturer number | 116380 20 |
This article |
Recommendations |
|||
---|---|---|---|---|
Jobber drill HSS-E for Hardox H, uncoated, ⌀ DC h8: 20mm
on request
In stock
4 pieces in stock
€137.00
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
7 pieces in stock
€116.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
189 pieces in stock
€117.50
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
8 pieces in stock
€79.00
plus VAT at the current rate
Prices plus delivery costs
|
|
Number of cutting edges Z | 2 | 2 | 2 | 2 |
Through-coolant | no | no | no | no |
Nominal ⌀ DC | 20 mm | 20 mm | 20 mm | 20 mm |
Standard | Manufacturer’s standard | DIN 1897 | DIN 1897 | DIN 1897 |
Shank | Morse taper | Plain shank | Plain shank | Three drive flats shank |
Tolerance nominal ⌀ | h8 | h8 | h8 | h8 |
recommended maximum drilling depth L2 | 53 mm | 36 mm | 36 mm | 36 mm |