{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Woodruff keyseating cutter, uncoated, ⌀ DC × LC h11 × e8: 10,5X2mm
Article no.: 194010 10,5X2
Article code:
- Tool material: HSS Co 5
- Standard: DIN 850 D/F
- Milling profile: staggered teeth
- Tolerance nominal ⌀: e8
- No. of teeth Z: 6
Product details
Technical Data
| Cutting edge ⌀ DC | 10.5 mm | |
| Flute length Lc | 2 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 5 | |
| Standard | DIN 850 D/F | |
| Milling profile | staggered teeth | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 6 | |
| Direction of infeed | horizontal | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| for Woodruff keyways to DIN 6888 | 2.0×3.7 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.045 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | without | |
| Type of product | Slot milling cutter |
Identification numbers & Classifications
| Article number | 194010 10,5X2 | |
| EAN / GTIN | 4045197109132 | |
| Manufacturer number | 194010 10,5X2 |
Application Table
N
250
N
70
P
35
P
28
K
22
N
35
Description
Version:
Peripheral cutting, alternate set teeth (staggered).
The sides of the teeth are ground to give clearance and thus cannot jam in the component.
Special surface treatment.
The sides of the teeth are ground to give clearance and thus cannot jam in the component.
Special surface treatment.
Note:
For milling Woodruff keyways to DIN 6888 or for milling small slots.