{{ name }}
Prekės Nr. {{ combinedCodeWithHighlight }}
Prekės numeris:
EAN / GTIN:
Gamintojo numeris:
Hurco 45° pull stud with 4-mm bore and fit sealed, suitable for steep tapers: 40
Prekės Nr.: 308801 40
Prekės numeris:
- Pull stud standard: MAS 403
Produkto detalės
Techniniai duomenys
| suitable for steep tapers | 40 | |
| Pull stud standard | MAS 403 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 15 mm | |
| Overall length L | 57.15 mm | |
| L1 | 32 mm | |
| Thread M | M16 | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identifikavimo numeriai ir klasifikacijos
| Produkto numeris | 308801 40 | |
| EAN / GTIN | 4045197644497 | |
| Gamintojo numeris | 308801 40 |
Aprašymas
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also DIN 69871 / ISO 7388-1.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.