{{ name }}
Prekės Nr. {{ combinedCodeWithHighlight }}
Prekės numeris:
EAN / GTIN:
Gamintojo numeris:
Pull stud, 18CrNiMo7 Form A 50
Prekės Nr.: 308605 50
Prekės numeris:
- Pull stud standard: ISO 7388-3
Produkto detalės
Techniniai duomenys
| suitable for steep tapers | 50 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 36 mm | |
| Head ⌀ D1 | 28 mm | |
| Overall length L | 74 mm | |
| L1 | 34 mm | |
| Thread M | M24 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 150 Nm | |
| suitable for taper arbors with colour code | SK 50 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identifikavimo numeriai ir klasifikacijos
| Produkto numeris | 308605 50 | |
| EAN / GTIN | 4045197554536 | |
| Gamintojo numeris | 308605 50 |
Aprašymas
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
ISO 7388-3 meets the old standard DIN 69872.
Atsisiuntimai ir dokumentai
Palyginti su panašiais produktais
Šis produktas |
Rekomendacijos |
||
|---|---|---|---|
Pull stud, 18CrNiMo7 Form A 50
reikia užklausti
Yra sandėlyje
919 vnt. yra sandėlyje
£13.20
be PVM
plius siuntimo kaštai
|
|||
| Collar ⌀ D | 36 | 36 | 36 |
| Thread M | M24 | M24 | M24 |
| Head ⌀ D1 | 28 | 28 | 28 |
| maximum tightening torque | 150 | 150 | 150 |
| suitable for taper arbors with colour code | SK 50 | SK 50 | SK 50 |
| Angle A | 15 | 15 | 15 |
| Hole characteristics | with bore | with bore | with bore |