{{ name }}
Prekės Nr. {{ combinedCodeWithHighlight }}
Prekės numeris:
EAN / GTIN:
Gamintojo numeris:
HiPer-Drill grąžtas 20 mm
Prekės Nr.: 231610 20
Prekės numeris:
- Modelis: 5×D
- Kotas: ISO 9766
- Grąžto panaudojimas: ribotas skersinis gręžimas; ribotas gręžimas paketais; ribotas gręžimas su įkypu išėjimu; ribotas įkypas pragręžimas
- Number of cutting edges Z: 2
- Vidinis aušinimas: taip
Produkto detalės
Techniniai duomenys
| Series | HiPer-Drill | |
| Modelis | 5×D | |
| Kotas | ISO 9766 | |
| Grąžto panaudojimas | ribotas skersinis gręžimas; ribotas gręžimas paketais; ribotas gręžimas su įkypu išėjimu; ribotas įkypas pragręžimas | |
| Number of cutting edges Z | 2 | |
| Vidinis aušinimas | taip | |
| Dia. range Dc | 20 mm - 20.99 mm | |
| Reach L1 | 105 mm | |
| Shank ⌀ Ds | 25 mm | |
| Shank length Ls | 56 mm | |
| Clamping screw | 231999 9IP (2.2 Nm) | |
| Overall length L | 192 mm | |
| Produkto rūšis | Grąžtas su keičiamomis plokštelėmis |
Identifikavimo numeriai ir klasifikacijos
| Produkto numeris | 231610 20 | |
| EAN / GTIN | 4045197603036 | |
| Gamintojo numeris | 231610 20 |
Aprašymas
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.