{{ name }}
Prekės Nr. {{ combinedCodeWithHighlight }}
Prekės numeris:
EAN / GTIN:
Gamintojo numeris:
Solid carbide HPC drill plain shank DIN 6535 HA 11
Prekės Nr.: 122659 11
Prekės numeris:
- Type d'outils: Carbure monobloc
- Standard: DIN 6537
- Exécution: 6×D
- Tolerance nominal ⌀: m6
- Number of cutting edges Z: 2
Produkto detalės
Techniniai duomenys
| Nominal ⌀ DC | 11 mm | |
| Revêtement | TiAlN | |
| Type d'outils | Carbure monobloc | |
| Standard | DIN 6537 | |
| Exécution | 6×D | |
| Tolerance nominal ⌀ | m6 | |
| Number of cutting edges Z | 2 | |
| Angle de pointe | 140 degré | |
| recommended maximum drilling depth L2 | 54.5 mm | |
| Queue | DIN 6535 HA avec h6 | |
| Arrosage interne | Oui, à 25 bars | |
| Méthode d'usinage | HPC | |
| Semi-Standard | oui | |
| Flute length Lc | 71 mm | |
| Overall length L | 118 mm | |
| Shank ⌀ Ds | 12 mm | |
| Shank tolerance | h6 | |
| Feed f in stainless steel > 900 N/mm2 | 0.15 mm/rev. | |
| Bague de couleur | Bleu | |
| Type de produit | Forets hélicoïdaux |
Identifikavimo numeriai ir klasifikacijos
| Produkto numeris | 122659 11 | |
| EAN / GTIN | 4045197456472 | |
| Gamintojo numeris | 122659 11 |
Informacinė pritaikymo lentelė
P
170
P
140
P
130
P
110
P
70
M
90
M
80
K
95
Aprašymas
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole, thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from ⌀ 3.8 mm. Up to 3.7 mm ⌀ with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips, even on long chipping materials.
Attention:
Sizes ending with X = cutter ⌀ tolerance h7.