• Gli uffici di Hoffmann Italia Spa saranno chiusi dal 12 al 16 Agosto compresi. Puoi continuare ad effettuare i tuoi ordini tramite eShop e saranno evasi dal nostro magazzino centrale come di consueto.

Elemento base HiPer-Drill 16 mm

Codice art.: 231617 16
più IVA all’aliquota corrente Prezzo più spese di spedizione
su richiesta
Disponibile a magazzino
20 pezzi in magazzino

Seleziona la variante e la quantità

⌀ DC (mm) Prezzo unitario IVA incl.
  • Version: 10×D
  • Shank: ISO 9766
  • Use for drilling: limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling
  • Number of cutting edges Z: 2
  • Through-coolant: yes

Aggiungi alla lista articoli

Condividi questo prodotto

o copia questo link

Dettagli prodotto

Dati tecnici

Series HiPer-Drill
Version 10×D
Shank ISO 9766
Use for drilling limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited oblique spot drilling
Number of cutting edges Z 2
Through-coolant yes
Dia. range Dc 16 mm - 16.99 mm
Reach L1 170 mm
Shank ⌀ Ds 20 mm
Shank length Ls 50 mm
Clamping screw 231999 8IP1 (1.2 Nm)
Overall length L 246 mm
Type of product Indexable drill

Codice articolo e classificazioni

Codice articolo 231617 16
EAN / GTIN 4045197868176
Codice del produttore 231617 16

Descrizione

Version:

  • Very high feed rates and maximum performance due to optimally matched geometries and materials.
  • Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
  • High concentricity when assembled.
  • Shank support for optimum stability in operation.

Polished flutes.

Application:

For stationary and rotating use. For holes up to IT9 accuracy.

Note:

Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
The insert screw must be replaced after every fifth change of cutter insert.
Reduce feed rates f by 10 % and vc values by 30 %.
For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.

Download & documenti

Prodotti correlati

Ricambi

Inserti

Servizi & Consulenza prodotti

Acquisto veloce

Accedi al tuo account

Nel carrello

Al carrello
Al carrello