{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Corpo base HiPer-Drill 16 mm
Codice art.: 231610 16
Codice materiale:
- Esecuzione: 5×D
- Codolo: ISO 9766
- Utilizzo foro: per foratura trasversale; per foratura in pacchetti; per uscita obliqua; per foratura obliqua
- Number of cutting edges Z: 2
- Passaggio interno per LR: sì
Dettagli prodotto
Dati tecnici
| Series | HiPer-Drill | |
| Esecuzione | 5×D | |
| Codolo | ISO 9766 | |
| Utilizzo foro | per foratura trasversale; per foratura in pacchetti; per uscita obliqua; per foratura obliqua | |
| Number of cutting edges Z | 2 | |
| Passaggio interno per LR | sì | |
| Dia. range Dc | 16 mm - 16.99 mm | |
| Reach L1 | 85 mm | |
| Shank ⌀ Ds | 20 mm | |
| Shank length Ls | 50 mm | |
| Clamping screw | 231999 8IP1 (1,2 Nm) | |
| Overall length L | 161 mm | |
| Tipo di prodotto | Punta a inserti |
Codice articolo e classificazioni
| Codice articolo | 231610 16 | |
| EAN / GTIN | 4045197602992 | |
| Codice del produttore | 231610 16 |
Descrizione
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled. (For holes up to IT9 accuracy)
- Shank support for optimum stability in operation.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
The insert screw must be replaced after every fifth change of cutter insert.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Further sizes up to ⌀ 50.99 mm available on request.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.