{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Momentnyckel med mätur 6 Nm
Article no.: 655520 6
Article code:
Click to enlarge image
Click to enlarge image
Beskrivning av förklaringen se beskrivningstexten.
- Dragriktning: For right and left-hand tightening
- mätnoggrannhet vridmoment: ±4
- Provningsprotokoll: Manufacturer’s test certificate
Product details
Technical Data
| maximalt vridmoment | 6 Nm | |
| Dragriktning | For right and left-hand tightening | |
| mätnoggrannhet vridmoment | ±4 % | |
| Provningsprotokoll | Manufacturer’s test certificate | |
| totallängd L | 225 mm | |
| momentintervall | 1,2 Nm - 6 Nm | |
| skalgradering 1 delstreck = | 0,1 Nm | |
| vikt | 400 g | |
| fyrkantsfäste | 1/4 tum | |
| visning | analogue | |
| Utlösningssignal | visual | |
| Anslutningsform | Drivningsfyrkant (spärrnyckel) | |
| Mätteknik | mechanical | |
| Loggbara data | nej | |
| Inställning av utlösningsvärdet | Släpvisare | |
| Feedback | visande | |
| omkopplingsbar avläsning | Nm | |
| mätmetod | vridmoment | |
| Utlösningsvärdets justerbarhet | inte justerbar | |
| Norm | DIN EN ISO 6789 | |
| Spaklängd utan insticksverktyg [l1] | 144 mm | |
| Spaklängd inklusive stickmått för fabrikskalibrering [l3] | 180 mm | |
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 655520 6 | |
| EAN / GTIN | 4045197549907 | |
| Manufacturer number | 655520 6 |
Description
Version:
One-armed; slim design with easily readable dial gauge. Body entirely of steel, chrome-plated with fixed square drive for plug-in heads.
Units of measure: Nm
Units of measure: Nm
Non-slip 2-component handle.
Function:
Actual torque can be read on the gauge whilst working; the final value is held by the memory pointer to be read later.
Application:
For controlled single tightening of screws and for controlled measurements.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.