{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Tapping chuck type DSPL with shank 30
Article no.: 334510 30
Article code:
Find similar products here:
Product details
Technical Data
| Thread range | M14 − M30 | |
| for Whitworth threads | G9/16 − G1.1/8 | |
| for Whitworth pipe threads | R1/4 − 7/8 | |
| Clamping range square | 0 mm - 18 mm | |
| Shank ⌀ range | 11 mm - 23 mm | |
| pivoting parallel to axis | 2 mm | |
| Length compensation in compression | 10 mm | |
| Length compensation in tension | 30 mm | |
| Length from the machine spindle | 230 mm | |
| Body ⌀ | 106 mm | |
| Morse taper MT | 4 | |
| Type of product | Tapping head |
Identification numbers & Classifications
| Article number | 334510 30 | |
| EAN / GTIN | 2050001921086 | |
| Manufacturer number | 6707508 |
Description
Version:
- Double clamping is achieved by 3 jaws which centre the tap shank and by 4 additional jaws which clamp the tap square drive.
- When set correctly, the safety clutch prevents tap breakage.
- Blind hole threads can be tapped down to the bottom.
- The self-adjustment mechanism compensates for misalignment errors between the machine spindle and the component.
- The flexible length compensation is effective on compression and tension. It prevents the thread being cut incorrectly with manual or power feed.
Application:
For tapping internal threads on reversible drilling machines, turret lathes. Applicable horizontally and vertically for right-handed threads.
Supplied with:
1 chuck key.