{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving lathe centre 60° 2
Article no.: 320657 2
Article code:
Product details
Technical Data
| Morse taper | MT2 | |
| Body ⌀ D | 45 mm | |
| Reach B | 76 mm | |
| largest centre point ⌀ 60° A | 20 mm | |
| maximum radial run-out | 0.005 mm | |
| Centre point length C | 26 mm | |
| maximum speed | 5,000 min-1 | |
| for workpiece weight | 200 kg | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320657 2 | |
| EAN / GTIN | 4045197774132 | |
| Manufacturer number | 320657 2 |
Description
Version:
- Punch axis of through-hardened steel mounted on shank bearings.
- Live centre through hardened, multiple regrinding possible.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- Complete tool hardened and ground.
Point angle 60°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For all types of lathe, equally suitable for roughing and finish turning.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Revolving lathe centre 60° 2 |
||
| for workpiece weight | 200 | 140 |
| Body ⌀ D | 45 | 45 |
| maximum radial run-out | 0.005 | 0.005 |
| Morse taper | MT2 | MT2 |
| Reach B | 76 | 87 |
| largest centre point ⌀ 60° A | 20 | 20 |
| Type of product | Centring drill | Centring drill |