{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
SlimLine revolving lathe centre 60°/30° 5
Article no.: 320643 5
Article code:
Product details
Technical Data
| Morse taper | MK5 | |
| Body ⌀ D | 50 mm | |
| Overall length L | 223 mm | |
| Reach B | 93 mm | |
| largest centre point ⌀ 60° A | 12 mm | |
| largest centre point ⌀ 30° A | 25 mm | |
| maximum radial run-out | 0.005 mm | |
| Centre point length C | 41.5 mm | |
| maximum speed | 3,000 min-1 | |
| for workpiece weight | 1,600 kg | |
| Version | With draw-off nut | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 320643 5 | |
| EAN / GTIN | 4062406127299 | |
| Manufacturer number | 320643 5 |
Description
Version:
- Precision version with additional stiffness in the bearings.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- MT shank hardened and ground.
- With extended centre, point angle 60° / 30°.
- With push-off thread and push-off nut.
- outstandingly suitable for cutting threads and splining.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Advantage:
Push-off nut can be removed forwards thus eliminating any obstruction to the machining process.
Application:
Machining small and very small parts such as thread machining with optimum access to the flat face.
Supplied with:
Including draw-off nut.