{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Pull stud Mori-Seiki, sealed, form A, with bore ⌀ 7 mm, suitable for steep tapers: 40
Article no.: 308630 40
Article code:
- Pull stud standard: ISO 7388-3
Product details
Technical Data
| suitable for steep tapers | 40 | |
| Hole characteristics | with bore ⌀ 7 mm | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 19 mm | |
| Overall length L | 54 mm | |
| L1 | 29 mm | |
| Thread M | M16 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Identification numbers & Classifications
| Article number | 308630 40 | |
| EAN / GTIN | 4045197485915 | |
| Manufacturer number | 308630 40 |
Description
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Verwendung:
- Für Werkzeuge mit Steilkegelschaft DIN 69871 und JIS B 6339 (MAS-BT).
- In Bearbeitungszentren (Maschinen mit automatischem Werkzeugwechsler).
- In NC-Maschinen (Maschinen ohne automatischem Werkzeugwechsler).
Hinweis:
Abgedichtet − mit O-Ring.
Bei Montage des AB auf korrektes Anzugsmoment achten.
ISO 7388-3 entspricht alter Norm DIN 69872.
Bei Montage des AB auf korrektes Anzugsmoment achten.
ISO 7388-3 entspricht alter Norm DIN 69872.