{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
ISO code indexable insert | WNMG 080408 | |
Corner radius | 0.8 mm | |
Grade | HBT130 | |
Tool material | Carbide | |
Main application | M | |
Cutting conditions | slightly interrupted | |
Chip breaker | MM | |
Cutting depth ap | 0.5 mm - 5 mm | |
Feed f | 0.12 mm/rev. - 0.45 mm/rev. | |
Cutting speed vc main application | 50 m/min - 200 m/min | |
Coating | TiCN | |
Number of changes/inserts | 6 | |
Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | |
Type of product | Indexable insert for turning |
Article number | 252095 HBT130 | |
EAN / GTIN | 4062406256852 | |
Manufacturer number | 252095 HBT130 |
This article |
Recommendations |
||||||
---|---|---|---|---|---|---|---|
WNMG 080408, Grade: HBT130 |
on request
In stock
685 pieces in stock
from
1
Pieces
NOK 173,56
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
NOK 144,59
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
573 pieces in stock
from
1
Pieces
NOK 170,22
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
NOK 141,85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
574 pieces in stock
from
1
Pieces
NOK 173,56
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
NOK 144,59
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,884 pieces in stock
from
1
Pieces
NOK 170,22
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
NOK 141,85
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
558 pieces in stock
NOK 108,35
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
1,771 pieces in stock
from
1
Pieces
12,66 €
plus VAT at the current rate
Prices plus delivery costs
from
10
Pieces
10,55 €
plus VAT at the current rate
Prices plus delivery costs
|
|
ISO code indexable insert | WNMG 080408 | WNMG 080404 | WNMG 080404 | WNMG 080408 | WNMG 080408 | WNMG 080404 | WNMG 080408 |
Finishing/roughing assignment | Skrubbearbejdning-sletbearbejdning | Grovbearbetning till finbearbetning | Grovbearbetning till finbearbetning | Grovbearbetning till finbearbetning | Grovbearbetning till finbearbetning | Grovbearbetning till finbearbetning | Pusiau glotnusis apdirbimas |
Cutting conditions | slightly interrupted | kontinuerligt | snitt intermittent | kontinuerligt | snitt intermittent | retai pertraukiamas | retai pertraukiamas |
Grade | HBT130 | HB7120-1 | HB7140-1 | HB7120-1 | HB7140-1 | HBT130 | HB7130-2 |
Feed f | 0.12 mm/rev. - 0.45 mm/rev. | 0,1 mm/v - 0,5 mm/v | 0,1 mm/v - 0,5 mm/v | 0,1 mm/v - 0,5 mm/v | 0,1 mm/v - 0,5 mm/v | 0,12 mm/aps. - 0,45 mm/aps. | 0,1 mm/aps. - 0,5 mm/aps. |
Cutting speed vc main application | 50 m/min - 200 m/min | 80 m/min - 260 m/min | 60 m/min - 230 m/min | 80 m/min - 260 m/min | 60 m/min - 230 m/min | 50 m/min - 200 m/min | 70 m/min - 240 m/min |
Type of product | Indexable insert for turning | Vändskär för svarvning | Vändskär för svarvning | Vändskär för svarvning | Vändskär för svarvning | Vändskär för svarvning | keičiamosios plokštelės tekinimui |