{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
KOMET KUB Quatron® vändskärsborr kombiskaft 35 mm
Article no.: 235502 35
Article code:
- Drill depth for indexable insert drill up to: 3×D
- Shank: DIN 6535 HE, DIN 6595
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Product details
Technical Data
| Serie | KUB Quatron® | |
| Nominell⌀ D | 35 | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | DIN 6535 HE, DIN 6595 | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Effektiv längd L1 | 105 mm | |
| för tumdiameter | 1 3/8 tum | |
| Utkragningslängd LA | 134 mm | |
| Skaftdiameter Ds | 32 mm | |
| Skaftlängd Ls | 60 mm | |
| ISO-kod vändskär | SOEX 120508 44-.. | |
| Skruvsats förvändskär | 239652 20IP (6,3 Nm) | |
| Antal skär Z | 1 | |
| totallängd L | 194 mm | |
| Type of product | Indexable drill |
Identification numbers & Classifications
| Article number | 235502 35 | |
| EAN / GTIN | 4047109026469 | |
| Manufacturer number | U11 83500 |
Description
Version:
With combination shank.
- Optimised coolant channels for reliable chip evacuation.
- Point angle 174° for almost flat-bottomed holes.
Application:
- For stationary and rotating use.
- For difficult drilling conditions (rolling scale, sloping surfaces of castings, interrupted cutting).
- For bores with tolerance ± 0.2 mm.
With indexable inserts No. 236520 − 236576.
Supplied with:
Clamp screws (without indexable inserts).
Note:
Further sizes available on request.