{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide ball nose slot drill 1,5 mm
Article no.: 207106 1,5
Article code:
- Tool material: Solid carbide
- Norm: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 2
Product details
Technical Data
| Cutting edge ⌀ DC | 1.5 mm | |
| Coating | uncoated | |
| Tool material | Solid carbide | |
| Norm | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.05×D for copy milling; 0.05×D for side milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 2 mm | |
| Radius R | 0.75 mm | |
| Overhang length L1 incl. recess | 5 mm | |
| Recess ⌀ D1 | 1.44 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.006 mm | |
| Feed fz for copy milling in steel < 900 N/mm2 | 0.006 mm | |
| Colour ring | without | |
| Type of product | Ball-nosed slot drill |
Identification numbers & Classifications
| Article number | 207106 1,5 | |
| EAN / GTIN | 4045197540430 | |
| Manufacturer number | 207106 1,5 |
Application Table
N
230
N
180
N
140
P
90
P
80
P
70
P
45
M
40
M
35
K
70
N
160
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide ball nose slot drill 1,5 mm |
|||
| Overall length L | 50 | 50 | 50 |
| Cutting edge ⌀ DC | 1.5 | 1.5 | 1.5 |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Tolerance nominal ⌀ | e8 | f8 | h10 |
| Type | N | N | N |
| Feed fz for side milling in steel < 900 N/mm2 | 0.006 | 0.006 | 0.006 |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |