{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master INOX solid carbide milling cutter with chip separators TPC 12 mm
Article no.: 203118 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: e8
- No. of teeth Z: 6
Product details
Technical Data
| Series | Master INOX | |
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 6 | |
| Helix angle | 36 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.07×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 48 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 12 mm | |
| Number of chip separators | 2 | |
| Corner chamfer width at 45° | 0.24 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in INOX < 900 N/mm2 | 0.061 mm | |
| Colour ring | blue | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203118 12 | |
| EAN / GTIN | 4062406783754 | |
| Manufacturer number | 203118 12 |
Application Table
P
320
P
290
P
260
P
200
M
220
M
160
S
120
Description
Version:
High-performance milling cutter with irregular cutter spacing and irregular helical pitch. High process reliability and better chip evacuation due to increased flutes. Optimised carbide substrate for higher bending strength and extreme tool life, even in stainless steels in the high-performance field, especially duplex. Chip separator positioned offset at cutting edges.
Advantage:
Lower pull-out forces due to reduced helix angle.