{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Hole tolerance: H7
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Shank: DIN 1835 A to h6
- Application for type of drilling: for through holes
Product details
Technical Data
| Number of reamers | 6 | |
| Hole tolerance | H7 | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Shank | DIN 1835 A to h6 | |
| Application for type of drilling | for through holes | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162925 6 | |
| EAN / GTIN | 4045197994813 | |
| Manufacturer number | 162925 6 |
Description
Version:
Version suitable for NC similar to DIN 212 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. For highest concentricity and process reliability. No need to order special collets. With long flutes and left-hand helix. Even number of teeth with irregular spacing. Size 3 with centring tip, from size 4 with centre holes at both ends.
Reamer manufacturing tolerance to DIN 1420 for H7 hole tolerance field.
Reamer manufacturing tolerance to DIN 1420 for H7 hole tolerance field.
Content:
1 pc. each NC reamer: Size 3; 4; 5; 6; 8; 10
Supplied with:
6-piece NC reamer set in a box.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
NC reamer set No. 162900 in a box H7 6 |
||
| Hole tolerance | H7 | H7 |
| Standard | Manufacturer’s standard | DIN 206 B |
| Tool material | HSS E | HSS |
| Helix angle | 7-8 | |
| Application for type of drilling | for through holes | for through holes |
| Number of reamers | 6 | 6 |
| Type of product | Phillips bit | Phillips bit |