{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Hand reamer Configurable 11 mm
Article no.: 160200 11
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Even number of teeth with irregular spacing − teeth are exactly opposite each other; e. g. teeth 1 and 5.
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Through-coolant: no
- Application for type of drilling: for through holes
Product details
Technical Data
| Nominal ⌀ DC | 11 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Application for type of drilling | for through holes | |
| ⌀ range | 10.601 mm - 11.100 mm | |
| Flute length Lc | 71 mm | |
| Overhang L1 | 92 mm | |
| Overall length L | 142 mm | |
| Number of cutting edges Z | 6 | |
| Shank square □ | 9 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160200 11 | |
| EAN / GTIN | 4045197927033 | |
| Manufacturer number | 160200 11 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/4 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Hand reamers finish ground to match your specifications.
Hand reamers finish ground to match your specifications.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
|
Hand reamer Configurable 11 mm |
|||
| Number of cutting edges Z | 6 | 6 | 6 |
| Coating | uncoated | uncoated | uncoated |
| Overall length L | 142 | 142 | 175 |
| Through-coolant | no | no | no |
| Flute length Lc | 71 | 41 | 41 |
| Tool material | HSS | HSS E | HSS E |
| Application for type of drilling | for through holes | for through holes | for through hole |