{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
- Tolerance: H7
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Application for type of drilling: for through hole
Offers
Set with price advantage
Product details
Technical Data
| Nominal ⌀ DC | 8 mm | |
| Tolerance | H7 | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Application for type of drilling | for through hole | |
| Flute length Lc | 58 mm | |
| Overhang L1 | 72 mm | |
| Overall length L | 115 mm | |
| Number of cutting edges Z | 6 | |
| Shank square □ | 6.3 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 160150 8 | |
| EAN / GTIN | 4045197937216 | |
| Manufacturer number | 160150 8 |
Application Table
N
P
P
P
Description
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/5 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.
Note:
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Hand reamer H7 8 mm |
||
| Number of cutting edges Z | 6 | 6 |
| Colour ring | without | without |
| Standard | DIN 206 B | DIN 8093 |
| Flute length Lc | 58 | 33 |
| Tool material | HSS | Carbide K10 |
| Application for type of drilling | for through hole | for through holes |
| Type of product | Phillips bit | Phillips bit |